|
Additional Information
• Isolation between input and output Custom Voltages available on request
• Substantial Input Filter
• Stabilised output voltage
• Convection cooled
• Output 12V DC +/- 2%
• Output 24V DC +/- 2%
• Protection for reverse input polarity (fuse)
• Load dump
• Overload (by current limiting)
• Overtemperature (by current limiting)
• Output over voltage (shutdown, auto re-start)
• Short circuit output (by current limiting)
General Specifications
Weight : 500g
Efficiency: typically 85% at full load
Ambient Operating Temperature : -20 / +450C
Max. temperature increase 30 degrees by full load for 30 minutes at an ambient temperature of 20 degrees.
Dimensions (l x w x h) : 152mm x 88mm x 49mm
Input & Output Connections: 6.3mm x 0.8mm fastons
The Technology The MDCI 100 range of DC-DC Converters use high frequency switched mode technology for high efficiency, small size and light weight.
Isolation Isolation between input and output cures difficult ground loop problems, allowing optimum wiring in complex systems. This can avoid noisy power lines degrading signal lines.
|
