|
Additional Information
• Isolation between input and output Custom Voltages available on request
• Substantial Input Filter
• Stabilised output voltage
• Fan cooled
• Output 12V DC +/- 2%
• Output 24V DC +/- 2%
• Protection for reverse input polarity (fuse) load dump overload (by current limiting) overtemperature (by current limiting) output over voltage (shutdown, auto re-start) short circuit output (by current limiting)
General Specifications
• Weight : 600g
• Efficiency: typically 85% at full load
• Ambient Operating Temperature : -20 / +450C
• Max. temperature increase 30 degrees by full load for 30 minutes at an ambient temperature of 20 degrees.
• Dimensions (l x w x h) : 182mm x 88mm x 49mm
• Input & Output Connections: 6.3mm x 0.8mm fastons
The Technology The MDCI 200 range of DC-DC Converters use high frequency switched mode technology for high efficiency, small size and light weight.
Isolation Isolation between input and output cures difficult ground loop problems, allowing optimum wiring in complex systems. This can avoid noisy power lines degrading signal lines.
|
